Industrial Monitoring System with Real-time Alerts and Automated Protection Mechanisms

PDF (880KB), PP.56-67

Views: 0 Downloads: 0

Author(s)

Nabusha Alice 1 Asiimwe Julius 1 U. I. Bature 1,* Mugisha Simon 1 Tusiime Meron 1

1. Department of Electrical Engineering, Faculty of Engineering, Technology, Applied Design and Fine Art, Kabale University, Kabale, Uganda

* Corresponding author.

DOI: https://doi.org/10.5815/ijem.2025.02.05

Received: 17 Dec. 2024 / Revised: 18 Jan. 2025 / Accepted: 23 Feb. 2025 / Published: 8 Apr. 2025

Index Terms

Industrial Monitoring, Protection System, Sensors, Potential Hazard, Safety

Abstract

This work presents the design and prototyping of an Industrial Monitoring and Protection System aimed at enhancing safety and operational efficiency in industrial environments. The system integrates multiple sensors with a GSM module to monitor and respond to critical environmental parameters, such as ambient light levels, temperature, and smoke detection. A Light Dependent Resistor (LDR) is configured to detect excessive lighting levels, interfacing with a microcontroller to activate the GSM module and send alert messages when thresholds are exceeded. The temperature sensor continuously monitors ambient temperature, and upon detecting overheating, the microcontroller triggers the GSM module to notify operators. Similarly, a smoke sensor detects the presence of harmful smoke and initiates an alert through the GSM module for early fire hazard detection. These sensors are connected to the microcontroller via analog and digital input pins, with their outputs processed to enable condition-based responses. A relay switch, controlled by the microcontroller, automatically disconnects connected loads when safety thresholds are breached, preventing equipment damage and ensuring personnel safety. Real-time sensor readings and system status are displayed on an OLED screen, providing operators with comprehensive, up-to-date information on the monitored environment. The system dynamically responds to environmental conditions by triggering alerts and actions based on customizable safety thresholds for light intensity, temperature, and smoke levels. This integrated architecture ensures seamless communication between sensors, the microcontroller, and the GSM module, delivering real-time monitoring, automated protective mechanisms, and early warning capabilities. The proposed system demonstrates the feasibility of affordable and scalable solutions for industrial safety, offering immediate responses to hazardous conditions while minimizing downtime. Furthermore, its adaptable design allows for customization across different industrial environments, making it suitable for a wide range of applications.

Cite This Paper

Nabusha Alice, Asiimwe Julius, U. I. Bature, Mugisha Simon, Tusiime Meron, "Industrial Monitoring System with Real-time Alerts and Automated Protection Mechanisms", International Journal of Engineering and Manufacturing (IJEM), Vol.15, No.2, pp. 56-67, 2025. DOI:10.5815/ijem.2025.02.05

Reference

[1]E. Hidalgo-Fort, J. A. Gómez-Galán, R. González-Carvajal, P. Sánchez-Cárdenas, and C. Clemente-Maya, "Battery-less industrial wireless monitoring and control system for improved operational efficiency," Sensors, vol. 23, no. 5, p. 2517, 2023.
[2]M. Javaid, A. Haleem, R. P. Singh, S. Rab, and R. Suman, "Significance of sensors for Industry 4.0: Roles, capabilities, and applications," Sensors International, vol. 2, p. 100110, 2021.
[3]B. D. Majumder, J. K. Roy, and S. Padhee, "Recent advances in multifunctional sensing technology on a perspective of multi-sensor system: A review," IEEE Sensors Journal, vol. 19, no. 4, pp. 1204–1214, 2018.
[4]R. Sowah, A. R. Ofoli, S. Krakani, and S. Fiawoo, "Hardware module design of a real-time multi-sensor fire detection and notification system using fuzzy logic," in 2014 IEEE Industry Application Society Annual Meeting, pp. 1–6, 2014.
[5]Yekini N. Asafe, Adigun J. Oyeranmi, Oloyede A. Olamide, Akinade O. Abigael, "Gas Leakage Detector and Monitoring System", International Journal of Engineering and Manufacturing (IJEM), Vol.12, No.5, pp. 56-65, 2022. DOI:10.5815/ijem.2022.05.05
[6]Ronnie Camilo F. Robles, Ruth G. Luciano, Rolaida L. Sonza, Arnold P. Dela Cruz, Mariel Cabrillas, " Fire and Motion Early Warning Device: Its Design and Development ", International Journal of Engineering and Manufacturing (IJEM), Vol.11, No.6, pp. 1-10, 2021. DOI: 10.5815/ijem.2021.06.01
[7]Riska Ekawita, Nori Wirahmi, Elfi Yuliza, "Project Based Learning of Free-Falling Objects in Physics: Microcontroller-Based Multi-Sensor Test in Granular Flow Rate Measurement", International Journal of Engineering and Manufacturing (IJEM), Vol.14, No.5, pp. 1-13, 2024. DOI:10.5815/ijem.2024.05.01
[8]W.-F. Cheung, T.-H. Lin, and Y.-C. Lin, "A real-time construction safety monitoring system for hazardous gas integrating wireless sensor network and building information modeling technologies," Sensors, vol. 18, no. 2, p. 436, 2018.
[9]J. Al Rafi, L. K. Msbah, M. A. B. Siddiq Sayem, S. T. Hossain, S. U. Alam, and M. J. Hasan, "Monitoring harmful sound density, light intensity state in industrial workplace," in 2019 International Conference on Signal Processing and Communication (ICSC), pp. 3–8, 2019.
[10]EPR Magazine Editorial, "Electrical fires: addressing the root causes for a safer future," EPR Magazine, Jun. 29, 2023. [Online]. Available: https://www.eprmagazine.com/special-report/electrical-fires-addressing-the-root-causes-for-a-safer-future/. [Accessed: Nov. 25, 2024].
[11]S. Paruchuri, S. Vaishnavi, D. V. Krishna, P. Munaswamy, and M. Khadir, "Remote temperature monitoring and alerting system," in 2023 14th International Conference on Computing Communication and Networking Technologies (ICCCNT), pp. 1–5, 2023.
[12]G. Gathiya, K. K. Patel, and K. Yadav, "Home & industrial safety using fire & gas detection system," EasyChair Preprint, no. 5476, 2021. 
[13]S. Akwu, U. I. Bature, K. I. Jahun, M. A. Baba, and A. Y. Nasir, "Automatic plant irrigation control system using Arduino and GSM module," International Journal of Engineering and Manufacturing, vol. 10, no. 3, p. 12, 2020.
[14]D. Patra, S. Chavhan, D. Gupta, A. Khanna, and J. J. P. C. Rodrigues, "An efficient method for remote control and cloud-based monitoring of industrial equipment over GSM network," in 2021 6th International Conference on Smart and Sustainable Technologies (SpliTech), pp. 1–6, 2021.
[15]M. Pilon, P. Parikh, T. Wetmore, and B. Morgan, "Practical use of protective relays to enhance personnel safety in process industries," in 2022 IEEE IAS Petroleum and Chemical Industry Technical Conference (PCIC), pp. 439–445, 2022.
[16]A. A. Jaber, F. K. I. Al-Mousawi, and H. S. Jasem, "Internet of things based industrial environment monitoring and control: A design approach," International Journal of Electrical and Computer Engineering (IJECE), vol. 9, no. 6, pp. 4657–4667, 2019.